বার্তা পাঠান

Integral 0918 Portable Surface Roughness Tester Machine

1 পিসি
MOQ
300-400USD
মূল্য
Integral 0918 Portable Surface Roughness Tester Machine
বৈশিষ্ট্য গ্যালারী পণ্যের বর্ণনা উদ্ধৃতির জন্য আবেদন
বৈশিষ্ট্য
বিশেষ উল্লেখ
Measuring Range: 0~2000um(Maximum adjustable to 6500um)
ইউনিট: মেট্রিক/ইংরেজি সিস্টেম ইন্টারচেঞ্জ
রেজোলিউশন: 0.001 মিমি (0.00005")
পরিমাপ আইটেম: সারফেস প্রোফাইল এবং পিট
সঠিকতা: ±2um
পরীক্ষা সুই ব্যাস: 0.2 মিমি
পরীক্ষা সুই দৈর্ঘ্য: 8.2 মিমি
বেস যোগাযোগ পৃষ্ঠ ব্যাস: 30MM
বেস যোগাযোগ পৃষ্ঠ ভিতরের গর্ত ব্যাস: 9 মিমি
পণ্যের নাম: সারফেস প্রোফাইল গেজ
লক্ষণীয় করা:

huatec portable surface roughness tester

,

integral portable surface roughness tester

,

integral roughness tester

মৌলিক তথ্য
উৎপত্তি স্থল: বেইজিং
পরিচিতিমুলক নাম: HUATEC
সাক্ষ্যদান: ISO, CE, GOST
মডেল নম্বার: SRT-5240
প্রদান
Packaging Details: Standard export package
ডেলিভারি সময়: 1-4 দিন
পরিশোধের শর্ত: টি/টি, পেপ্যাল, ওয়েস্টার্ন ইউনিয়ন
যোগানের ক্ষমতা: প্রতি মাসে 500 পিসি
পণ্যের বর্ণনা

0918 Potable Surface Finish Digital Surface Profile Gauge Surface Surface Roughness Machine

 

The SRT-5240 digital metric/imperial surface profile, or roughness, needle gauge is a low cost option for surface profile measurement.

The Digital Surface Profile Gauge can directly measure the height of the peak valley bottom of the surface, the surface profile and the pits.

With only a small measuring area, it can accurately and quickly measure the peak and valley values of clean and rough surfaces

It is applicable to users in the industries with surface roughness requirements such as shot blasting, printing, painting and anti-corrosion industries.

 

Conform to the international authoritative general standard ISO8503-5.

 

Main application:

  • Enables quick assessment of surface condition prior to coating
  • It works on grit sand shot blasted and saw cut surfaces
  • The small size of this surface profile gauge makes it easy to use and easy to balance on the surface
  • Its design permits accuracies equivalent to an electronic surface trace
  • Gives maximum peak to average valley height
  • Available with metric and imperial units
  • This gauge can also measure the depth of pits, cracks, craters and scratches of the outer (and in some cases the inside) surfaces of steel structures, pipes and concrete
  • We also have available pit and crack depth gauges

Using method:

First, use the glass zero plate to calibrate the zero point, then place the foot on the surface to be measured, then the probe can measure the height from the wave crest to the wave trough, and finally take the average value, which is the roughness value of the surface to be measured.

 

Main parameters:

 

Product model SRT-5240
Measuring range Surface profile and pits
range 0~2000um(Maximum adjustable to 6500um)
accuracy ±2um
unit Metric/English system interchange
Testing needle diameter 0.2mm
Testing needle length 8.2mm
Base contacting surface diameter 30mm
Base contacting surface inner hole diameter 9mm

 

Standard configuration:

 

name quantity name quantity
Host machine 1 Calibration sheet 1
Allen wrench 1 battery 2
Instrument packing box 1 instructions 1
Warranty card 1 HUATEC Calibration certification 1

 

Integral 0918 Portable Surface Roughness Tester Machine 0

 

প্রস্তাবিত পণ্য
আমাদের সাথে যোগাযোগ করুন
ব্যক্তি যোগাযোগ : JingAn Chen
টেল : 8610 82921131,86 13261934319
ফ্যাক্স : 86-10-82916893
অক্ষর বাকি(20/3000)